NSF-S.S. (FLUX) / NSAW-309L (WIRE)

Specification
AWS Specification: AWS A5.9 ER 309L
JIS Specification: N/A
Other Specification: N/A
Description
  • NSF-S.S. (FLUX) is an agglomerated bonded type flux for low carbon welding of 22% Cr - 12% Ni stainless steel and dissimilar steels that features high desposition rate, high strength, and good bead appearance
  • NSAW-309L (WIRE) is a stainless steel welding wire that features levels of chromium and nickel with reduced carbon content (0.03% ma) xto address the risk of intergranular corrosion
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Si

Mn

Cr

Ni

Mo

0.03

0.47

1.47

23.50

13.41

-

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
Tensile Strength
N/mm2 (KSI)
 
Elongation
%
 

570 (83)

40

 

WIRE SIZES AVAILABLE:

DIAMETER (mm)

2.4

3.2

4.0

4.8


NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • For low carbon welding of 22% Cr - 12% Ni stainless steel and dissimilar steels welding
  • Wire Packing: 25 KG per coil
  • Flux Packing: 50 KG per sack

ABOUT US

For over 37 years, NIHONWELD has been the market leader of high quality welding electrodes in both the domestic and international markets. With Nihonweld, you will WELD WITH COMPLETE CONFIDENCE.
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines