NT-AL 5356

Specification
AWS Specification: AWS A5.10 ER 5356
JIS Specification: N/A
Other Specification: N/A
Description
  • NT-AL 5356 is a 5% magnesium aluminum filler metal that is available for TIG welding 
  • Weld deposit offers better corrosion resistance when exposed to salt and water
  • Post-anodizing color tint is white
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

Al

Si

Mn

Fe

Cu

Bal.

0.25

0.05 - 0.20

0.40 max.

0.10 max.

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
Tensile Strength
N/mm2 (KSI)
 

26 (3.80)

 

SIZE AVAILABLE:

DIAMETER (mm)

1.6

2.4

3.2

LENGTH (mm)

1,000

1,000

1,000


NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • Common application are for base metal types 5050, 5052, 5083, 5356, and 5456

about us

Industrial Welding Corporation (IWC) was established in 1982 by Mr. H. Ong Hai who had 25 years of welding industry experience (at that time). Since then, IWC has consistently and successfully earned an excellent ...
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines