NSF-50 (FLUX) / NICOR 104 (WIRE)

Specification
AWS Specification: N/A
JIS Specification: N/A
Other Specification: N/A
Description
  • NICOR 104 is a tubular submerged arc wire with excellent resistance to impact deformation
  • Deposits are crack-free and can be machinable with high speed and carbide tools
  • Maximum deposit thickness is unlimited
  • NSF-50 (FLUX) is a fused flux used with NICOR line of tubular hardfacing wire
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Mn

Si

Mo

Cr

V

Ni

W

Fe

0.13

2.00

0.80

0.20

1.05

-

-

-

Base

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
 
Hardness (HRC)
 

30 - 35

 

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+), DC (-)

DIAMETER (mm)

2.8

3.2

4.0

Current (Amp) 300 - 325 350 - 400 425 - 475

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • Alloy content = 3%
  • Flux Packing: 50 KG per sack
  • Wire Packing: 25 KG per coil
  • Build up prior to hardfacing of tractor rollers, idlers, tunnions, rolls, and cable drums
  • Shaft rebuilding
  • Final overlay for tractor rail links and steel shafts

about us

Industrial Welding Corporation (IWC) was established in 1982 by Mr. H. Ong Hai who had 25 years of welding industry experience (at that time). Since then, IWC has consistently and successfully earned an excellent ...

contact us

17 Mac Arthur Hi-way, Potrero, Malabon, Metro Manila, 1475 Philippines
(+632) 363-7865 / 66 / 68
(+632) 361-0255
(+632) 362-2668
sales@nihonweld.com
admin@nihonweld.com
export@nihonweld.com
Copyright © 2018 Industrial Welding Corporation Web Design By WebToGo Philippines