NB-GCR GRAY CAST (BARE)

Specification
AWS Specification: N/A
JIS Specification: N/A
Other Specification: N/A
Description
  • NB-GCR GRAY CAST (BARE) contains deposits that are easily machined and have excellent color match to gray cast iron
  • Also rusts like cast iron and, therefore, machined repairs are not noticeable.
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Si

Mn

S

P

Fe

3.41

2.95

0.62

0.016

0.016

Bal.

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
Tensile Strength
N/mm2 (KSI)
 
Hardness HB
 
Melting Point
°C
 

276 (40)

200

820

 

SIZES AVAILABLE:

DIAMETER (mm)

5.0 - 8.0


NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • For oxy-fuel brazing of gray cast iron

ABOUT US

For over 40 years, NIHONWELD has been the market leader of high quality welding electrodes in both the domestic and international markets. With Nihonweld, you will WELD WITH COMPLETE CONFIDENCE.
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines