SHIELD METAL ARC WELDING (SMAW)

 Printer Friendly Layout

AZUCAL 80

Specification
AWS Specification: N/A
JIS Specification: N/A
Other Specification: N/A
Description
  • AZUCAL 80 (The "Sugar" Electrode) is a flux coated electrode specially designed for the sugar cane industry
  • Deposits a dispersion of small, hard, and highly wear resistant globules for roughening the metal surfaces that come in contact with the sugar cane when it is being crushed
  • Can be welded directly onto a sugar impregnated or wet surface when the roller is running, stationary, or during the milling operation
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Si

Mn

Cr

3.40

0.92

1.92

30.00

 

HARDNESS OF WELD METAL:
Hardness
Vickers (Hv)
Rockwell (HRC)

Value

60 - 63

700 - 770

 

SIZE AND RECOMMENDED CURRENT RANGE: DC (+)

DIAMETER (mm)

3.2

4.0

5.0

LENGTH (mm)

450

450

400

Current Amp

120 - 150

140 - 170

170 - 220

Welding Positions: ALL POSITIONS EXCEPT OVERHEAD
Approvals: N/A

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • Sugar cane crushing rollers
  • Sugar industry 
  • No special welding technique is required when using this electrode as long as the welding current is set correctly

ABOUT US

For over 40 years, NIHONWELD has been the market leader of high quality welding electrodes in both the domestic and international markets. With Nihonweld, you will WELD WITH COMPLETE CONFIDENCE.
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines