NSS-308L

Specification
AWS Specification: AWS A5.4 E308L-16
JIS Specification: D308L-16
Other Specification: N/A
Description
  • NSS-308L is a lime-titania type electrode that shows 19% Cr - 9% Ni austenitic weld metal
  • Corrosion resistant
  • Spatter free
  • Good slag detachability
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Si

Mn

Cr

Ni

0.02

0.67

1.03

19.97

9.69

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
Yield Point
N/mm2 (KSI)
 
Tensile Strength
N/mm2 (KSI)
 
Elongation
%
 

455  (66)

590 (86)

45

 

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+)

DIAMETER (mm)

1.6

2.0

2.5

3.2

4.0 5.0

LENGTH (mm)

255

255

300

350

350 350

Current Amp

Flat

20 - 50

20 - 50

50 - 80

70 - 110

100 - 150 130 - 180

Vertical & Overhead

15 - 45

15 - 45

45 - 75

65 - 105

95 - 140 -

Welding Positions: ALL POSITIONS 
Approvals: ABS

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • Welding of AISI301, AISI302, and AISI304 stainless steel
  • Chemical and food processing industry
  • Keep the arc length as short as possible
  • Choose the appropriate recommended welding current

ABOUT US

For over 40 years, NIHONWELD has been the market leader of high quality welding electrodes in both the domestic and international markets. With Nihonweld, you will WELD WITH COMPLETE CONFIDENCE.
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines