NSF-50 (FLUX) / NICOR 107 (WIRE)

Specification

AWS Specification: N/A
JIS Specification: N/A
Other Specification: N/A

Description

NICOR 107 (WIRE) is a tubular submerged arc wire with good abrasion in meta-to-metal wear applications
Features excellent impact resistance, good compressive strength, and resistance to plastic deformation
Deposits are readily machinable with carbide tools and can be flame cut
NSF-50 (FLUX) is a fused flux used with NICOR line of tubular hardfacing wire

Application

Rollers
Idlers
Carbon steel crane wheels
Mine car wheels

Remarks

Alloy content = 6%

Flux Packing: 50 KG per sack

Wire Packing: 25 KG per coil

Technical Data

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C	Mn	Si	Mo	Cr	V	Ni	W	Fe
0.20	1.60	0.65	0.35	0.270	-	-	-	Base

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:

Hardness (HRC)

40 - 45

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+), DC (-)

DIAMETER (mm)		3.2	4.0
Current (Amp)		350 - 400	425 - 475

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.