NT-08R

Specification

Description

• NT-08R is a copper coated gas welding rod that is used for welding ordinary low carbon steel up to 1/4” thick
• Recommended for brazing where ductility and machinability are most important

Application

• General purpose oxyfuel rod for welding mild steels

Remarks

Clean joint and bevel heavy sections keeping torch tip at low angle to base metal

Technical Data

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C	Si	Mn	S	P	Fe
0.08	0.07	0.42	0.025	0.025	Bal.

 

SIZES AVAILABLE:

DIAMETER (mm)

1.6 - 5.0

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.