NFCW-308LT-1

Specification

AWS Specification: AWS A5.22 E308LT1-1
JIS Specification: JIS Z3323 YF308LC
Other Specification: N/A

Description

NFCW-308LT-1 provides stable arc, easy slag removal, less spatter, and minimal welding fumes
Weld metal includes optimum ferrite contents in its austenitic structures
Features excellent weldability and low crack susceptibility

Application

For welding of 18% Cr – 8% Ni stainless steel (SUS 304, SUS 304L)
Also suitable for MAG welding

Remarks

Weldability for all position welding includes vertical, overhead, and horizontal position

Excellent performance in automatic welding processes, such as robotic process

Technical Data

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C	Si	Mn	P	S	Ni	Cr
0.03	0.62	1.56	0.022	0.010	10.50	19.50

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:

Yield Point N/mm² (kgf/mm²)	Tensile Strength N/mm² (kgf/mm²)	Elongation %	Impact Value J (kfg/m)
380 (30)	400 (58)	41	57 (5.8)

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+),

DIAMETER (mm)		2.6	3.2	4.0	5.0
LENGTH (mm)		350	350	350	350
Current Amp	Flat	50 - 80	70 - 110	120 – 160	160 - 200
Current Amp	Vertical Overhead	40 - 70	60 - 100	110 - 150	140 - 180

Welding Positions:	ALL POSITIONS INCLUDING VERTICAL DOWN
Approvals:	ABS, BV, DNV, LRS, NK

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.