ABRADUR V1000

Specification

AWS Specification: N/A
JIS Specification: N/A
Other Specification: N/A

Description

ABRADUR V1000 is a chromium carbide hadsurfacing welding electrode specially formulated for hardfacing parts that are subject to the following wear factors: severe abrasoin and corrosion, moderate impact, and heat exposure
The weld metal deposit typically contains 3.5-4.5 Carbon and 35-37% Chromium and therefore exhibits exceptional wear resistance from hard minerals, particles, and rocks
Features smooth weld bead deposits and easy striking / re-striking properties
Typically used in in repair and maintenance of parts subject to mineral abrasion, such as conveyor screws, mixer blades, and excavator bucket edges

Application

Mixer blades
Refractory press screws
Conveyor screw
Excavator bucket edges

Remarks

Hold electrode as vertically as possible Keep a short arc Preheating is not necessary For multipass applications, a cushion layer with NSS-307 or NHF-Cromang is recommended in order to prevent hardening racks in the weld deposit Re-dry electrodes that have gotten damp for at 300�C for 2 hours

Technical Data

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

3.50 - 4.50

0.80 - 1.20

0.60 - 1.00

35 - 37

HARDNESS OF WELD METAL:

Hardness	Rockwell (H_RC)
Value	58 - 62

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (-)

DIAMETER (mm)	3.2	4.0	5.0
LENGTH (mm)	350	350	350
Current Amp	90 - 130	140 - 180	190 - 240

Welding Positions:	FLAT, FILLET, HORIZONTAL
Approvals:	N/A

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.