nihonweldnihonweldnihonweld

Printer Friendly Layout
NSS-308H
AWS Specification: E308H-16
JIS Specification:

NONE

Other Specification:

I. APPLICATIONS:

Typical applications include chemical, petrochemical industries as well as distillery, dairy and restaurant equipment.

II. DESCRIPTION:

NSS-308H is used to weld un-stabilized austenitic stainless steels such as 302, 304 and 305. It provides greater corrosion resistance than the base metals on which they are applied.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

 

C

Mn

Si

Cr

Ni

0.05

1.00

0.80

20.00

10.00

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

 

Tensile Strength

N/mm2 (ksi)

Elongation

%

600 (87)

40

V. WELDING POSITIONS:FLAT, VERTICAL UP, OVERHEAD

VI. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

 

Diameter (mm

2.5

3.2

4.0

5.0

Length (mm)

300

350

350

350

Current

Range

F

70-85

85-110

110-140

120-160

V, OH

65-75

80-90

100-120

110-130

 

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.