nihonweldnihonweldnihonweld

Printer Friendly Layout
NIHONWELD NSS-ARMOURWELD
AWS Specification:
JIS Specification:
Other Specification:

I. APPLICATIONS:

Joining welding of stainless steel of the 18%Cr-8%Ni and 0-3% Mo type and generally all steels with alloy

content between 16-21% Cr and 6-13% Ni and 0-3% Mo. Suitable for ARMOURED VEHICLES or ARMOURED PLATES used for bullet proof purposes.

II. DESCRIPTION:

NSS-ARMOURWELD is a rutile type electrode. 18% Cr 8% Ni – 2% Mo deposited metal shows excellent crack resistance. Good striking and re-striking. Regular appearance, finely rippled, smooth running. Easy slag removal.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

 

C

Mn

Si

Ni

Cr

P

S

Mo

0.03

1.49

0.70

9.10

18.70

0.010

0.009

2.00

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

 

Tensile Strength

N/mm2 (ksi)

Elongation

%

566 (82)

50

V. WELDING POSITIONS: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD

VI. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

 

Diameter (mm

2.5

3.2

4.0

5.0

Length (mm)

300

350

350

350

Current

Range

45-75

75-110

90-140

140-180

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.