nihonweldnihonweldnihonweld

Printer Friendly Layout
NT-AL 5356 / NM-AL 5356
AWS Specification: ER5356
JIS Specification:

NA

Other Specification:

FOR ALUMINUM STEEL

I. APPLICATIONS:

Common applications would be base metals 5050, 5052, 5083, 5356 and 5456.
 

II. DESCRIPTIONS:

NT-AL5 (5356) is more commonly referred to as Al Mg 5. It is a 5% magnesium aluminum filler metal that is available for TIG and MIG welding processes. The weld deposit of NT-AL 5356 offers much better corrosion resistance when exposed to salt and water. The post-anodizing color tint is white.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

Al

Si

Mn

Fe

Cu

Bal

0.25

0.05-0.20

0.40 max

0.10 max

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

Tensile Strength N/mm2 (Ksi)

26 (3.8)

V. TIG AVAILABLE SIZES:

Dia.(mm)

1.6

2.4

3.2

Length (mm)

1000

1000

1000

Unit wt./packing (kgs.)

2.0

2.0

2.0

VI. MIG AVAILABLE SIZES AND RECOMMENDED CURRENT:

Size (dia.x length) mm

Amps

0.8 x spool

50-120

1.0 x spool

65-140

1.2 x spool

75-170

 

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.