nihonweldnihonweldnihonweld

Printer Friendly Layout
NT-316L / NM-316L
AWS Specification: ER-316L
JIS Specification:

NONE

Other Specification:

FOR STAINLESS STEEL

I. APPLICATIONS:

For welding 18%Cr-12%Ni-2%Mo stainless steel. Excellent corrosion resistance to sea water and nonoxidizing acids.

II. DESCRIPTION:

NT-316L/MN-316L is used for welding types 316 and 316L stainless steels. It has a maximum carbon content of .03% to reduce the possibility of formation of intergranular carbide precipitation. This low carbon alloy is not as strong as 316 at elevated temperatures.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%): 

 

C

Si

Mn

Cr

Ni

Mo

0.02

0.37

1.73

19.87

12.37

2.30

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

 

Tensile Strength N/mm2 (Ksi)

Yield Point

N/mm2 (Ksi)

Elongation %

560 (81)

415 (60)

43

V. SIZES AVAILABLE :

 

Dia.(mm)

1.6

2.0

2.4

3.2

4.0

Length (mm)

1000

1000

1000

1000

1000

Unit wt./packing (kgs.)

5.0

5.0

5.0

5.0

5.0

VI. MIG AVAILABLE SIZES AND RECOMMENDED CURRENT:

 

Size (dia.x length) mm

Amps

0.8 x spool

60-180

0.9 x spool

70-200

1.0 x spool

70-200

1.2 x spool

90-250

1.6 x spool

200-300

 TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.