nihonweldnihonweldnihonweld

Printer Friendly Layout
NT-309
AWS Specification: ER-309
JIS Specification:

none

Other Specification:

FOR STAINLESS

I. APPLICATIONS:

For welding similar 309 alloys or joining 300 series stainless steel to carbon or low alloy steels.

II. DESCRIPTION:

NT-309 is a highly quality low carbon solid stainless steel rod for the Gas or Gas Tungsten Arc (TIG) welding of highly alloyed 309 type stainless steels. NT-309 is also suitable for the dissimilar joining of other 300 series austenitic stainless steels to ferritic steels.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%): 

 

C

Si

Mn

Cr

Ni

0.05

0.36

2.04

23.51

13.48

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

 

Tensile Strength N/mm2 (Ksi)

Yield Point

N/mm2 (Ksi)

Elongation %

570 (83)

400 (58)

42

V. SIZES AVAILABLE :

 

Dia.(mm)

1.6

2.0

2.4

3.2

4.0

Length (mm)

1000

1000

1000

1000

1000

Unit wt./packing (kgs.)

5.0

5.0

5.0

5.0

5.0

 TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.