nihonweldnihonweldnihonweld

Printer Friendly Layout
NT-308L / NM-308L
AWS Specification: ER-308L
JIS Specification:

NONE

Other Specification:

FOR STAINLESS STEEL

 

I. APPLICATIONS:

For welding types 201, 302, 304, and 304L stainless steel.

II. DESCRIPTION:

NT-308L is a premium quality low carbon solid stainless steel wire for TIG & MIG welding of low carbon 18% Cr –8% Ni stainless steel such as AISI 301, 304, 304L and equivalent types.

Deposited metal contain low carbon and shows excellent resistance to intergranular corrosion and cracking.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

 

C

Si

Mn

Cr

Ni

0.025

0.37

1.85

19.8

9.85

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

 

Tensile Strength N/mm2 (Ksi)

Yield Point

N/mm2 (Ksi)

Elongation %

560 (81)

420 (61)

43

V. TIG ROD AVAILABLE SIZES:

 

Dia.(mm)

1.6

2.0

2.4

3.2

4.0

Length (mm)

1000

1000

1000

1000

1000

Unit wt./packing (kgs.)

5.0

5.0

5.0

5.0

5.0

VI. MIG AVAILABLE SIZES AND RECOMMENDED CURRENT:

 

Size (dia.x length) mm

Amps

0.8 x spool

60-180

0.9 x spool

70-200

1.0 x spool

70-200

1.2 x spool

90-250

1.6 x spool

200-300

 

 TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.