nihonweldnihonweldnihonweld

Printer Friendly Layout
NIHONWELD NSS-308L-15
AWS Specification: E308L-15
JIS Specification:

D308L-15

Other Specification:

I. APPLICATIONS:

 

Welding of AISI types 301, 302 and 304 stainless steel.

II. DESCRIPTION:

NSS-308L-15 is designed for welding of AISI types 301, 302 and 304 stainless steel. It is based on lime-titania formula and recommended for welding with DC + current Welds are porosity free with corrosion resistance comparable to that of base metal.

 III. NOTES ON WELDING:

 

  • Keep the arc length as short as possible.

  • The welding current should be used as low as possible. 

IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

 

C

Si

Mn

Cr

Ni

0.03

0.41

1.67

20.60

9.50

V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

 

Tensile Strength N/mm2 (Ksi)

Elongation %

550 (80)

44

VI. WELDING POSITIONS: ALL POSITIONS

VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

Diameter (mm

2.5

3.2

4.0

5.0

Length (mm)

300

350

350

350

Current

Range

F

50-80

70-110

100-150

130-180

V, OH

45-75

65-105

95-140

-

 

 TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.