nihonweldnihonweldnihonweld

Printer Friendly Layout
NIHONWELD N-8016-B5
AWS Specification: E8016-B5
JIS Specification:

NONE

Other Specification:

 

I. APPLICATIONS:

Welding of 0.5% Cr-1% Mo steels used for electric power and high pressure vessel.

     II. DESCRIPTION:

Fully positional, basic coated, low hydrogen electrode. Extremely smooth welding arc, with excellent welder appeal

     III. NOTES ON USAGE:

  • Dry the electrodes at 350-400°C for about one hour before use and store the electrodes at 100-150°C after drying them with attention to keep away from moisture.

  • Adopt back step method or strike the arc on a small steel plate prepared for this particular purpose to prevent blowholes at the arc starting.

  • Keep the arc as short as possible

  • Preheat at 100-150°C. The temperature to be applied varies in accordance with plate thickness and kind of steel to be welded.

  • Pay attention not to exceed proper heat-input because excessive heat-input causes deterioration of impact values and yield strength of weld metal.

IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C

Si

Mn

Cr

Mo

0.09

0.56

0.42

0.54

1.08

V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

 

Yield Point

N/mm2 (ksi)

Tensile Strength

N/mm2 (ksi)

Elongation

%

PWHT

570 (83)

650 (94)

26

690°C x 1 hr

VI. WELDING POSITIONS: ALL POSITIONS

VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS: AC or DC (+)

 

Size

(mm)

Dia.

2.5

3.2

4.0

5.0

Length

350

350

400

400

 

Current

Flat

55-85

90~130

130~180

180~240

V & OH

50-80

80-115

110-170

150-200

 

 TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.