NIHONWELD N-6011

AWS Specification: AWS A5.1 E6011
JIS Specification:

D4311

Other Specification:

DIN E4343C4

 I. APPLICATIONS:

 II. DESCRIPTIONS:

III. NOTES ON USAGE:

 IV. TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

 

C

Si

Mn

P

S

0.12

0.18

0.45

0.014

0.008

 V. TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:

 

Yield Point

N/mm2 (ksi)

Tensile Strength

N/mm2 (ksi)

Elongation

%

Impact Value

°C, J (°F, Ft-Lbs)

440 (64)

520 (75)

32

-29°, 90 (-20°, 66)

 VI. WELDING POSITIONS : ALL POSITION INCLUDING VERTICAL DOWN

 VII. SIZE & RECOMMENDED CURRENT RANGE: AC OR DC(+)

 

DIAMETER (mm)

2.6

3.2

4.0

5.0

LENGTH (mm)

350

350

350

350

Current Amp

Flat

50 - 80

70 - 110

120 – 160

160 - 200

Vertical,Overhead

40 - 70

60 - 100

110 - 150

140 - 180

 APPROVALS: ABS, BV,DNV, LRS,NK

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.